We are happy to feature Waveguide Detectors by HASCO. Our series of rectangular waveguide detectors cover the waveguide sizes WR-08, WR-10, WR-12, WR-15, WR-19, WR-22, and WR-28. They have an absolute maximum input power of +20 dBm. These detectors can be used for full or narrow band applications, and intended for small signal detection purposes. With a distinct circuitry design and careful diode selection, the detector exhibits high sensitivity and extremely flat output characteristics. The detectors are designed to have a 10 MHz video bandwidth and a 1 milliohm video output impedance. The minimum detectable signal level is approximately -50 dBm.
Features:
• Full Waveguide Band Operation • High Sensitivity Without Tuning • High Sensitivity Stability Over a Broad Temperature Range
Applications:
• Radar Systems • Communication Systems • Test instrumentations • 5G & 6G
Waveguide detectors offered by HASCO are square root small signal detectors. What this means is, for RF power in the range of -45 dBm to approximately 0 dBm, the detector output voltage is proportional to its incident power measure in watts. Because of the behavior exhibited, these detectors are also called “square law” detectors. In “linear” operations, the detected voltage output is proportional to the square-root value of the input power. In other words, the power to be detected vs. the output voltage is squared, not linear.
The HASCO Waveguide Detectors are RoHS Compliant.
|