Description
The HASCO HWPSD12-6090-S2 is an SMA Female E-Band waveguide detector from HASCO. This waveguide detector will operate from 60 GHz to 90 GHz. This detector that can be used for full or narrow band applications. The detector is zero biased and intended for small signal detection purposes. With a distinct circuitry design and careful diode selection, the detector exhibits high sensitivity and extremely flat output characteristics. The detector is designed to have a 10 MHz video bandwidth and a 1 milliohm video output impedance. The minimum detectable signal level is approximately -50 dBm. Waveguide detectors offered by HASCO are square root small signal detectors. What this means is, for RF power in the range of -45 dBm to approximately 0 dBm, the detector output voltage is proportional to its incident power measure in watts. Because of the behavior exhibited, these detectors are also called “square law” detectors. In “linear” operations, the detected voltage output is proportional to the square-root value of the input power. In other words, the power to be detected vs. the output voltage is squared, not linear.
Features:
• Full Waveguide Band Operation
• High Sensitivity Without Tuning
• High Sensitivity Stability Over a Broad Temperature Range
Applications:
• Radar Systems
• Communication Systems
• Test instrumentations
• 5G & 6G
Specifications
Item |
Specification |
---|---|
Input |
WR-12 Waveguide |
Output Connector |
SMA Female |
Frequency Range |
60 GHz to 90 GHz |
Flange |
UG-387/U |
Sensitivity |
1000 mV/mW Typical |
Flatness |
+/- 1.5 dB Max |
Polarity |
Positive |
Tangential Sensitivity |
-45 dBm (BW 40 Hz, dBm) |
CW Max Input Power |
+16 dBm |
Absolute Max Input Power |
+20 dBm |
Temperature Range |
-55°C to 85°C |
Mechanical Specifications
Item |
Specification |
---|---|
Body |
Gold Plated |
- Flange Type:
- UG-387/U
- Frequency, Max:
- 90 GHz
- Frequency, Min:
- 60 GHz
- Waveguide Size:
- WR-12
PRODUCT DETAILS
The HASCO HWPSD12-6090-S2 is an SMA Female E-Band waveguide detector from HASCO. This waveguide detector will operate from 60 GHz to 90 GHz. This detector that can be used for full or narrow band applications. The detector is zero biased and intended for small signal detection purposes. With a distinct circuitry design and careful diode selection, the detector exhibits high sensitivity and extremely flat output characteristics. The detector is designed to have a 10 MHz video bandwidth and a 1 milliohm video output impedance. The minimum detectable signal level is approximately -50 dBm. Waveguide detectors offered by HASCO are square root small signal detectors. What this means is, for RF power in the range of -45 dBm to approximately 0 dBm, the detector output voltage is proportional to its incident power measure in watts. Because of the behavior exhibited, these detectors are also called “square law” detectors. In “linear” operations, the detected voltage output is proportional to the square-root value of the input power. In other words, the power to be detected vs. the output voltage is squared, not linear.
Features:
• Full Waveguide Band Operation
• High Sensitivity Without Tuning
• High Sensitivity Stability Over a Broad Temperature Range
Applications:
• Radar Systems
• Communication Systems
• Test instrumentations
• 5G & 6G
Specifications
Item |
Specification |
---|---|
Input |
WR-12 Waveguide |
Output Connector |
SMA Female |
Frequency Range |
60 GHz to 90 GHz |
Flange |
UG-387/U |
Sensitivity |
1000 mV/mW Typical |
Flatness |
+/- 1.5 dB Max |
Polarity |
Positive |
Tangential Sensitivity |
-45 dBm (BW 40 Hz, dBm) |
CW Max Input Power |
+16 dBm |
Absolute Max Input Power |
+20 dBm |
Temperature Range |
-55°C to 85°C |
Mechanical Specifications
Item |
Specification |
---|---|
Body |
Gold Plated |