Distribution Amplifier with Panel Mount BNC Connectors, 10 MHz, 5 Channel

The DA100-10M00-A is a Distribution Amplifier with Panel Mount BNC Connectors, 5 Channel, designed for 10 MHz operation by Esterline Research and Design. The DA100 Distribution Amplifier primary function is to distribute an existing signal to multiple points while preserving its integrity. It includes a limiter circuit that not only provides a fixed output level but also offers high input gain. This design allows the amplifier to maintain the specified output power across a wide range of input power levels. The input limiter is followed by three amplifier/low-pass filter stages, which insure low-distortion sine wave outputs.

Enhance signal integrity with DA100 Distribution Amplifiers—engineered for optimal performance and reliability in high-demand RF and communication systems.

Low Phase Noise Distribution Amplifier with SMA Panel Mount Front Connectors, SMA Short Connectors on Rear, 5 MHz, 5 Channel

The DA200-5M00-C is a Low Phase Noise Distribution Amplifier with SMA Panel Mount Front Connectors, SMA Short Connectors on Rear, 5 Channel, designed for 5 MHz operation by Esterline Research and Design. The DA200 Distribution Amplifier primary function is to distribute an existing signal to multiple points while preserving its integrity and is ideal for situations requiring a low noise RF signal to be supplied to multiple usage points. It includes a limiter circuit that not only provides a fixed output level but also offers high input gain. This design allows the amplifier to maintain the specified output power across a wide range of input power levels. The input limiter is followed by three amplifier/low-pass filter stages, which insure low-distortion sine wave outputs.

Boost system efficiency with DA200 Distribution Amplifiers—designed for superior signal distribution and unmatched performance in complex RF and microwave applications.

Low Phase Noise CMOS Distribution Amplifier with SMA Short Connectors, 100 Hz to 100 MHz, 5 Channel, AC Coupled

The DA300-B-01 is a Low Phase Noise CMOS Distribution Amplifier with SMA Short Connectors, 5 Channel, AC Coupled, designed for 100 Hz to 100 MHz operation by Esterline Research and Design. The DA300 Distribution Amplifier primary function is to distribute an existing signal to multiple points while preserving its integrity and is ideal for situations requiring a low noise RF signal to be supplied to multiple usage points. The input is AC-coupled and has a 50 Ω source impedance. This design provides a 3.3 V CMOS output across a wide range of input power levels.

Elevate signal clarity with DA300 Distribution Amplifiers—built for exceptional power handling and precision in demanding RF and microwave environments.

HASCO RF MARKETING PARTNER

Low Phase Noise CMOS Distribution Amplifier with SMA Panel Mount Rear, SMA Short Connectors on Front, 100 Hz to 225 MHz, 5 Channel, DC Coupled

The DA400-D-02 is a Low Phase Noise CMOS Distribution Amplifier with SMA Panel Mount Rear, SMA Short Connectors on Front, 5 Channel, DC Coupled, designed for 100 Hz to 225 MHz operation by Esterline Research and Design. The DA400 Distribution Amplifier primary function is to distribute an existing signal to multiple points while preserving its integrity and is ideal for situations requiring a low noise RF signal to be supplied to multiple usage points. The input is AC-coupled and has a 50 Ω source impedance. This design provides a 1.8 V CMOS output across a wide range of input power levels.

Maximize signal reach with DA400 Distribution Amplifiers—optimized for high-performance and durability in advanced RF and communication systems.

Wide Band Distribution Amplifier & Splitter with SMA Panel Mount Front, SMA Short Connectors on Rear, 500 KHz to 500 MHz

The DA500-D is a Wide Band Distribution Amplifier & Splitter with SMA Panel Mount Front, SMA Short Connectors on Rear, designed for 500 KHz to 500 MHz operation by Esterline Research and Design. The primary function of DA500 Distribution Amplifier is to distribute an existing signal to multiple points while preserving its integrity. The DA500 is ideal for situations requiring a low noise RF signal to be supplied to multiple usage points. 

Achieve superior signal accuracy with DA500 Distribution Amplifiers—crafted for high efficiency and reliability in demanding RF and microwave applications.

HASCO's Quality Standard 

When ordering from HASCO, customers can expect several significant benefits. HASCO is renowned for its commitment to producing high-quality products. Our components are carefully crafted using premium materials and advanced manufacturing processes, guaranteeing long-lasting performance and durability.

HASCO's exceptional customer service and technical support add to the overall value. Expert guidance is readily available to assist customers in choosing the right components for their applications, while prompt and reliable delivery ensures customers receive their orders on time.

• Let us know how we can assist you •