sales@hasco-inc.com 
888-498-3242 
Description
The DA200-5M00-A is a Low Phase Noise Distribution Amplifier with Panel Mount BNC Connectors, 5 Channel, designed for 5 MHz operation by Esterline Research and Design. The DA200 Distribution Amplifier primary function is to distribute an existing signal to multiple points while preserving its integrity and is ideal for situations requiring a low noise RF signal to be supplied to multiple usage points. It includes a limiter circuit that not only provides a fixed output level but also offers high input gain. This design allows the amplifier to maintain the specified output power across a wide range of input power levels. The input limiter is followed by three amplifier/low-pass filter stages, which insure low-distortion sine wave outputs.
« Datasheet « Operation ManualSpecifications
Item |
Specification |
|---|---|
|
Frequency Range |
1 to 100 MHz |
|
Impedance |
45 to 55 Ohms |
|
Amplitude (Input) |
-2 to 16 dBm |
|
Amplitude |
8.5 to 11 dBm |
|
Amplitude |
0.78 to 1.40 Vrms |
|
THD |
1% Max |
|
Channel-to-Channel Isolation |
70 dB Min |
|
Voltage |
6 to 12 VDC |
|
Current |
250 mA |
- Frequency:
- 5 MHz
- Front Connector Series:
- BNC
- Front Connector Style:
- Panel Mount
- Rear Connector Series:
- BNC
- Rear Connector Style:
- Panel Mount
PRODUCT DETAILS 
The DA200-5M00-A is a Low Phase Noise Distribution Amplifier with Panel Mount BNC Connectors, 5 Channel, designed for 5 MHz operation by Esterline Research and Design. The DA200 Distribution Amplifier primary function is to distribute an existing signal to multiple points while preserving its integrity and is ideal for situations requiring a low noise RF signal to be supplied to multiple usage points. It includes a limiter circuit that not only provides a fixed output level but also offers high input gain. This design allows the amplifier to maintain the specified output power across a wide range of input power levels. The input limiter is followed by three amplifier/low-pass filter stages, which insure low-distortion sine wave outputs.
« Datasheet « Operation ManualSpecifications
Item |
Specification |
|---|---|
|
Frequency Range |
1 to 100 MHz |
|
Impedance |
45 to 55 Ohms |
|
Amplitude (Input) |
-2 to 16 dBm |
|
Amplitude |
8.5 to 11 dBm |
|
Amplitude |
0.78 to 1.40 Vrms |
|
THD |
1% Max |
|
Channel-to-Channel Isolation |
70 dB Min |
|
Voltage |
6 to 12 VDC |
|
Current |
250 mA |
